Item no.:SH200A Product name:Fume exhaust blower fan Material:PP
Model
m3/h
pa
r/min
W
N.W.(kg)
SIZE
NOISE
SH200A
2000
380
1450
300
8.8
46*43*34CM
65DB
1. Simple installation instructions: The inlet of the fan on the suction hood of the fume hood is connected to the fan inlet (the inlet and outlet can be directly inserted into the Φ200mm pipe), and the effect is obvious, light, corrosion-resistant, low-noise, beautiful and so on.
2. The volute and impeller are made by mould, and the motor power is reasonably configured and produced.
3, has been widely used in a variety of laboratory fume hood exhaust.
Model
m3/h
pa
r/min
W
N.W.(kg)
SIZE
NOISE
SH200A
2000
380
1450
300
8.8
46*43*34CM
65DB
1. Simple installation instructions: The inlet of the fan on the suction hood of the fume hood is connected to the fan inlet (the inlet and outlet can be directly inserted into the Φ200mm pipe), and the effect is obvious, light, corrosion-resistant, low-noise, beautiful and so on.
2. The volute and impeller are made by mould, and the motor power is reasonably configured and produced.
3, has been widely used in a variety of laboratory fume hood exhaust.
Model
m3/h
pa
r/min
W
N.W.(kg)
SIZE
NOISE
SH200A
2000
380
1450
300
8.8
46*43*34CM
65DB
1. Simple installation instructions: The inlet of the fan on the suction hood of the fume hood is connected to the fan inlet (the inlet and outlet can be directly inserted into the Φ200mm pipe), and the effect is obvious, light, corrosion-resistant, low-noise, beautiful and so on.
2. The volute and impeller are made by mould, and the motor power is reasonably configured and produced.
3, has been widely used in a variety of laboratory fume hood exhaust.
Model
m3/h
pa
r/min
W
N.W.(kg)
SIZE
NOISE
SH200A
2000
380
1450
300
8.8
46*43*34CM
65DB
1. Simple installation instructions: The inlet of the fan on the suction hood of the fume hood is connected to the fan inlet (the inlet and outlet can be directly inserted into the Φ200mm pipe), and the effect is obvious, light, corrosion-resistant, low-noise, beautiful and so on.
2. The volute and impeller are made by mould, and the motor power is reasonably configured and produced.
3, has been widely used in a variety of laboratory fume hood exhaust.
